Canon 50D Firmware 1.0.6 Released

Scott_Quier · April 23, 2009

For those that care (like me

), Canon has released a new firmware patch for the 50D.

Can be found here

Guess what I'm going to be doing tonight?

From their web-site, addresses the following:

This firmware update (Version 1.0.6) incorporates the following fixes.

1. Supports the AF assist beam feature of the new flash, Speedlite 270EX, which is scheduled to be released in April 2009.
2. Changes the error indications that are displayed on the camera.
3. Addresses the vertical banding noise phenomenon.

Firmware Version 1.0.6 is for cameras with firmware up to Version 1.0.5. If the camera's firmware is already version 1.0.6, it is not necessary to update the firmware.

In addition, Firmware Version 1.0.5 has already been incorporated with improvements to support the AF assist beam feature of Speedlite 270EX and change the error indications that are displayed on the camera.

Notes:
When updating to Firmware Version 1.0.6, please also update the Digital Photo Professional, Picture Style Editor, ZoomBrowser EX, and ImageBrowser software to the following versions or later.
*Digital Photo Professional: Version 3.5.2 (Windows/Macintosh)
*Picture Style Editor: Version 1.4.2 (Windows/Macintosh)
*ZoomBrowser EX: Version 6.2.1c (Windows)
*ImageBrowser: Version 6.2.1c (Macintosh)

For those that may be wondering what happened to 1.0.4 and 1.0.5 - it appears that 1.0.5 was included in more recently new 50D cameras but Canon chose not to post it on their site for download. Don't know about 50D 1.0.4 yet.

bgarland · April 23, 2009

Thanks for the heads up. I know what I'll be doing tonight too.

Khristen · April 23, 2009

Awesome Scott- Thanks!

Scott_Quier · April 23, 2009

FWIW - I just downloaded and installed it in my 50D cameras. As per the norm, it installed without a hitch (watch - next time it'll take my camera to lunch and not come back). Took one camera for a test drive - no issues. Don't see that it fixed anything in the high-ISO realm of things either. I'm sure there's something there that's useful.

eoren1 · April 23, 2009

Hey Scott,
I read over at dpreview that this update may affect microAF settings. Have you noticed that at all?
Thanks
E

pathfinder · April 23, 2009

Updated without incident.

Scott_Quier · April 23, 2009

eoren1 wrote:

Hey Scott,
I read over at dpreview that this update may affect microAF settings. Have you noticed that at all?
Thanks
E

I took some test shots with one camera and one lens. Focus seemed to be spot on.

But .... I guess I'll have to do some more testing. I have a shoot on Saturday. That testing will be done tomorrow. I'll post the results here afterwards.

Do you, by any chance, have a link to that dpreview thread?

eoren1 · April 23, 2009

Hey Scott,
Here's their thread: http://forums.dpreview.com/forums/readflat.asp?forum=1019&thread=31670853

Only saw one mention of it messing up the microAF settings. Not sure what to make of it. Didn't mean to stress you out before the shoot on Saturday. Guess you're going to revisit that tree, huh?

eoren1 · April 26, 2009

So I updated and noticed two (maybe three) things:
1. My clock seemed to have reverted to pre-DST time. I know that I had fixed it previously but, at the end of the day, realized I was slow by 1 hour
2. The camera seems to be underexposing by 1/3 of a stop now.
3. My microAF seems a bit off. Used my old 70-210 yesterday which had been a favorite after microAF adjusting. Seems just a hair off now.

On the plus side, shot at iso 200-3200 in decent light (shade/overcast 7pm) and was very impressed by what I think is improved noise at the higher isos. Then again, I may be imagining that...

Anyone experience similar results?
Thanks
E

jeffreaux2 · April 29, 2009

50D Firmware update version 1.0.6
I just saw that I had an email from Canon on this new firmware.....

Here:
http://www.usa.canon.com:80/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=314&modelid=17499

Scott_Quier · April 29, 2009

jeffreaux2 wrote:

I just saw that I had an email from Canon on this new firmware.....

Here:
http://www.usa.canon.com:80/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=314&modelid=17499

That's nice of them.

If you hung out around here a bit more, you would have known about it a week ago (link). Of course, I just couldn't resist messing with you a bit.

Nikolai · April 29, 2009

Hmm, somehow I missed this.. Thanks!
50D updated :-)

jeffreaux2 · April 29, 2009

Scott_Quier wrote:

That's nice of them.

If you hung out around here a bit more, you would have known about it a week ago (link). Of course, I just couldn't resist messing with you a bit.

Sorry...

Things have been crazy for the last week.

ziggy53 · April 29, 2009

Ooops, I feel a thread merge coming on.

troybal · April 30, 2009

Done with mine, thanks for the notice!
TR.

Jeremy Winterberg · June 21, 2009

Me? Outdated? Never thought I'd see the day!
lol, seems that I need an update. I guess I'm still on version 1.0.3...

Canon 50D Firmware 1.0.6 Released

Comments