Glass taking on table color

Dan7312Dan7312 Registered Users Posts: 1,330 Major grins
edited November 15, 2010 in Technique
I was trying to see if I could take a picture of a piece of glass without having it be full of blownout highlights. I was able to do that by putting a Westcott Apollo light box on a Speedlite and putting it close to this glass figure.

However now the glass seems to have sucked up the color of the wood that it is on. How can I prevent this?

The Apollo was next to the camera and about 3 feet from the glass with it's lower edge higher than the glass by about a foot, and it was pointed at the glass.

TIA for any hints.


1081182798_oKYnH-L.jpg

Comments

  • pathfinderpathfinder Super Moderators Posts: 14,694 moderator
    edited November 8, 2010
    Black velvet tablecloth, perhaps? Or even a white tablecloth, but I favor black.
    Pathfinder - www.pathfinder.smugmug.com

    Moderator of the Technique Forum and Finishing School on Dgrin
  • Dan7312Dan7312 Registered Users Posts: 1,330 Major grins
    edited November 8, 2010
    I wanted the wood to show... sorry I didn't mention that.

    But I'll give that a try, thanks.
    pathfinder wrote: »
    Black velvet tablecloth, perhaps? Or even a white tablecloth, but I favor black.
  • DonRicklinDonRicklin Registered Users Posts: 5,551 Major grins
    edited November 8, 2010
    Are you using PSCS? Put Glass on own layer and desaturate the color you don't want in just the glass???

    Don
    Don Ricklin - Gear: Canon EOS 5D Mark III, was Pentax K7
    'I was older then, I'm younger than that now' ....
    My Blog | Q+ | Moderator, Lightroom Forums | My Amateur Smugmug Stuff | My Blurb book Rust and Whimsy. More Rust , FaceBook
    .
  • Dan7312Dan7312 Registered Users Posts: 1,330 Major grins
    edited November 8, 2010
    Yes, I have PSCS but want to see if there is a lighting only solution so I can stick to just LR.

    Some parts of the glass have little light rainbows in them, and if I desat I will loose those.

    Thanks though, I'll give that a try too.
    DonRicklin wrote: »
    Are you using PSCS? Put Glass on own layer and desaturate the color you don't want in just the glass???

    Don
  • DonRicklinDonRicklin Registered Users Posts: 5,551 Major grins
    edited November 8, 2010
    Dan7312 wrote: »
    Yes, I have PSCS but want to see if there is a lighting only solution so I can stick to just LR.

    Some parts of the glass have little light rainbows in them, and if I desat I will loose those.

    Thanks though, I'll give that a try too.
    That's what painting on the Mask is for! :D

    IF you get your for incamera lighting situation worked out fine. That's a plus!

    Meanwhile you have a fall back Plan B! thumb.gif

    Don
    Don Ricklin - Gear: Canon EOS 5D Mark III, was Pentax K7
    'I was older then, I'm younger than that now' ....
    My Blog | Q+ | Moderator, Lightroom Forums | My Amateur Smugmug Stuff | My Blurb book Rust and Whimsy. More Rust , FaceBook
    .
  • ian408ian408 Administrators Posts: 21,904 moderator
    edited November 8, 2010
    Try lighting the glass from below the table. Maybe softbox from above? I'd go with as little direct light as possible.
    Moderator Journeys/Sports/Big Picture :: Need some help with dgrin?
  • Dan7312Dan7312 Registered Users Posts: 1,330 Major grins
    edited November 8, 2010
    Thanks! I didn't think of that. I'll give it a try.
  • ian408ian408 Administrators Posts: 21,904 moderator
    edited November 8, 2010
    And I should add that controlling the light with black gobos camera left/right would be a good idea as well.
    Moderator Journeys/Sports/Big Picture :: Need some help with dgrin?
  • Dan7312Dan7312 Registered Users Posts: 1,330 Major grins
    edited November 8, 2010
    Are gobo's male swans?rolleyes1.gif

    You mean like some sheer black material?
  • ian408ian408 Administrators Posts: 21,904 moderator
    edited November 8, 2010
    Dan7312 wrote: »
    Are gobo's male swans?rolleyes1.gif

    You mean like some sheer black material?

    Gobo is a "Goes Between" device. It can be anything but is usually something like a dark panel that prevents light from going through it. Sometimes you use them to prevent stray light from hitting the camera and sometimes to prevent light from getting to your subject.

    In your case, you have a light wall that you'll use to reflect the light and the two darker gobo's will be to prevent any other light from making it to the table. In other words, you are controlling light going to your subject.
    Moderator Journeys/Sports/Big Picture :: Need some help with dgrin?
  • QarikQarik Registered Users Posts: 4,959 Major grins
    edited November 8, 2010
    Since the glass piece is ctruved and irregular in shape, I don't think there is going to be any external light solution for you. The glass is always going to pick up color from the table.
    D700, D600
    14-24 24-70 70-200mm (vr2)
    85 and 50 1.4
    45 PC and sb910 x2
    http://www.danielkimphotography.com
  • ian408ian408 Administrators Posts: 21,904 moderator
    edited November 8, 2010
    Qarik wrote: »
    Since the glass piece is ctruved and irregular in shape, I don't think there is going to be any external light solution for you. The glass is always going to pick up color from the table.

    If you mitigate the reflections, then you'll have better results. The OP is using a softbox which spreads light everywhere (including the table top). If he still wants some of the table visible, then shooting the flash from under the table will give you the light and minimize what the table reflects back to the object.
    Moderator Journeys/Sports/Big Picture :: Need some help with dgrin?
  • IcebearIcebear Registered Users Posts: 4,015 Major grins
    edited November 8, 2010
    You might try cutting out a piece of black material to just fit the ground flat base of the sculpture. I believe that will help. You should also get a copy of "Light - Science and Magic" by Hunter, Biver & Fuqua. It is a fantastic book.
    John :
    Natural selection is responsible for every living thing that exists.
    D3s, D500, D5300, and way more glass than the wife knows about.
  • Dan7312Dan7312 Registered Users Posts: 1,330 Major grins
    edited November 9, 2010
    Thanks, I'm going to give try that... and that book looks pretty good too.
    Icebear wrote: »
    You might try cutting out a piece of black material to just fit the ground flat base of the sculpture. I believe that will help. You should also get a copy of "Light - Science and Magic" by Hunter, Biver & Fuqua. It is a fantastic book.
  • basfltbasflt Registered Users Posts: 1,882 Major grins
    edited November 9, 2010
    my idea , for what its worth

    make 2 shots

    one with table / wood properly lit
    one with glass properly lit
    cut out the glass and paste on the other one with the wood
  • RogersDARogersDA Registered Users Posts: 3,502 Major grins
    edited November 15, 2010
    Dan7312 wrote: »
    Thanks, I'm going to give try that... and that book looks pretty good too.
    Here is something to look at, too:

    http://www.mazenabusrour.com/?p=103
Sign In or Register to comment.