Options

Background Light Question

Bryce WilsonBryce Wilson Registered Users Posts: 1,586 Major grins
edited May 15, 2011 in Technique
I'm not really happy with the effect the snoot on my background light gives me for groups of three or more. I am thinking about trying a grid for that purpose. Would a 40 degree grid be a good place to start or are there other options I should consider?

Comments

  • Options
    BrandonJFXBrandonJFX Registered Users Posts: 18 Big grins
    edited May 14, 2011
    It really just depends on how much area on the background you want to be lit.
    I would say a 30 degree would be a good starting point.

    Hope that helps :)
    - Brandon
  • Options
    ziggy53ziggy53 Super Moderators Posts: 23,831 moderator
    edited May 15, 2011
    BrandonJFX wrote: »
    It really just depends on how much area on the background you want to be lit.
    I would say a 30 degree would be a good starting point.

    Hope that helps :)
    - Brandon

    15524779-Ti.gif

    It's both the area of the background and the distance from the flash/grid/snoot to the background that need to be considered. A single snoot or grid is rarely sufficient to cover all your needs.

    If you know the area to be covered and you know the distance you should be able to calculate the required spread angle. It's the spread angle of the light that is your concern and what dictates a particular modifier.

    If you don't know the required spread angle, we can't recommend any particular device. It would be best to go with a number of devices. If you want to try grids then a set of stacking grids is the safest bet.

    http://www.dgrin.com/showthread.php?t=141470

    http://www.dgrin.com/showthread.php?t=142718

    http://www.dgrin.com/showthread.php?t=193326
    ziggy53
    Moderator of the Cameras and Accessories forums
  • Options
    Bryce WilsonBryce Wilson Registered Users Posts: 1,586 Major grins
    edited May 15, 2011
    ziggy53 wrote: »
    15524779-Ti.gif

    It's both the area of the background and the distance from the flash/grid/snoot to the background that need to be considered. A single snoot or grid is rarely sufficient to cover all your needs.

    If you know the area to be covered and you know the distance you should be able to calculate the required spread angle. It's the spread angle of the light that is your concern and what dictates a particular modifier.

    If you don't know the required spread angle, we can't recommend any particular device. It would be best to go with a number of devices. If you want to try grids then a set of stacking grids is the safest bet.

    http://www.dgrin.com/showthread.php?t=141470

    http://www.dgrin.com/showthread.php?t=142718

    http://www.dgrin.com/showthread.php?t=193326

    Thank-you very much sirs!
Sign In or Register to comment.