1Dx Firmware upgrade 1.0.6

JimKarczewskiJimKarczewski Registered Users Posts: 969 Major grins
edited August 29, 2012 in Cameras
http://usa.canon.com/cusa/professional/products/professional_cameras/digital_slr_cameras/eos_1d_x#DriversAndSoftware

Can't find what they changed/Fixed but it's up there..

Here's to hoping I can assign something other than the voice annotation button to select a rating. Something that sucks if you use both Voice Annotation and Rating. (fail on canon's part to not think of this!)

Comments

  • JimKarczewskiJimKarczewski Registered Users Posts: 969 Major grins
    edited August 29, 2012
    From Fred Miranda's forum:

    Firmware Version 1.0.6 incorporates the following fixes.

    Fixes a phenomenon in which the AF Microadjustment cannot be correctly carried out.
    Fixes a phenomenon such that when using the camera with combinations of certain lens
    *1) and extender
    *2) the images captured become back-focused.
    *1) EF 70-200m f/2.8L IS II USM or EF200mm f/2L IS USM
    When used with
    *2) Extender EF 1.4x III or Extender EF 2x III
    Fixes a phenomenon in which, when the camera is powered on in very dark environments (including instances when the lens cap or the body cap is attached), Error 80 appears on the camera.
    Fixes the following phenomenon: if two CF cards are inserted into the camera and the “Standard” or “Auto switch card” settings is selected for the recording method for [Record func+card/folder sel.], and then one of the CF cards is removed and then reinserted into the card slot, the card selected for recording and playing back images may be switched to the other CF Card.
    Fixes a phenomenon in which the AF microadjustment value is not correctly displayed in the EXIF information of the images captured.
    Displays a “O” or “X” result to indicate whether images have been successfully transferred through the FTP protocol when using the FTP protocol when using the WFT-E6 Wireless File Transmitter.
Sign In or Register to comment.