I did a small favor for a friend, cutting some talking head footage that was shot in widescreen HD. He wants a little bitty square video to play in flash on his web page. But whatever I output did not work for the web guys. I could NOT get a square output with the anamorphic settings right. He was either stretched or squished.
Anybody have an easy way for me to take the HD footage, just crop off the sides and have it end up being a nice, square flash file?
Nice timing on the forum.
I'm a bit of a video guru myself, specifically with codec/conversions and directshow filters.
I do a lot of device compatability, so if you're wondering if x-type codec plays on x-type device, go ahead and ask me.
I work with everything from cellphone video to 4K(if you have a year to render)
Do you know the customization codes to make videos play automaticly(like on the Homepage) & how to hide the Smugmug Logo.
I appreciate your time.
I'm new to video and man is this confusing. I bought a new Sony HDR-SR12. It's HD (1920x1080) and records in AVCHD to it's hard disk. I wrongly assumed when I bought it that Smugmug would support it's video format, but after several failed upload attempts, it has been confirmed that Smugmug doesn't support the video format that comes out of the camera. Bummer.
So, I've been struggling for over 24 hours now to find something that can convert it to something that Smugmug understands. The software that comes with the camera won't save to any other HD format. Per Tristan's advice in another thread, I first tried VirtualDub, but it couldn't open my videos at all.
Then, he suggested I try MPEG Streamclip. I downloaded that, but it needed QuickTime stuff that's beyond the free QuickTime from Apple which I didn't have. So, I followed it's suggestions and deinstalled QuickTime from Apple and installed QuickTime Alternative, but even after doing that, MPEG Streamclip still says it doesn't have all the QuickTime stuff it needs. So, I gave up on that option.
At this point, I had no other ideas for a free converter that would do the job. If anyone else has any good ideas, I'm all ears. At this point, I just want to do format conversion to a Smugmug-supported HD format and probably trimming. I'll save video editing for later.
So if I can't find a free program, I figured I'd have to buy something. I decided to try the free trial of Sony Vegas Move Studio Platinum. Since it's made by Sony, it ought to support my camera files. Sure enough, it does.
But, now I have to figure out what format to save it to for Smugmug. I've never seen such a daunting array of choices full of acronyms I have no idea what they mean. To save, I have a choice of 16 formats and each format has a choice of 5-20 video codes and audio codecs and each of those has 5-10 settings within them (compression levels, bit rates, etc...). I really have no idea what a good choice is for Smugmug upload that will preserve as much quality as possible from the original and not be any larger than it needs to be to preserve that quality.
My choice of save formats are:
SONY AVC/AAC MP4
Given that I'm starting in AVCHD, what should I convert to before uploading to Smugmug? And what video and audio codecs should I use? By my calculations there are several hundred permutations of choices here and I'm hoping for some guidance on what is best.
Also, my camera records in 5.1 sound, but I think that's not supported by Smugmug. Does that means I have to do something else to the sound?
Man, what a mess. I've never pissed away so much time in my life trying to figure this out. All I'm tryhing to do is get a 45 second HD video up on my site from my brand new Sony camera. I've gotten a low-res MPEG2 version up, but don't know what choices will get a full res 1920x1080 version up.
Video codecs are truly horrendous. I work in video every day, but thankfully never have to worry about it, since I'm all offline, DV, and I have assistants to worry about things that aren't.
I have no help to offer, just that I hear ya, brother.
I recommend either a .mov or .avi with the h.264 codec, AAC 128kbps audio (stereo or mono).
If you can't do the h.264 codec, just make sure your video uses one of our supported codecs and you should be fine. Here's the list:http://wiki.smugmug.com/display/SmugMug/Video+Formats
I hope this helps.
David, are there any good forums that talk about video editing software where I might find some experts in this stuff?
Somebody must know what good mid-level editing software is for all these new AVCHD video cameras that could both read the Sony files and save to one of the Smugmug support formats. I think that rather than wasting a whole another day, I need to find people who know about this stuff.
It would appear that if you load "FFMPEG" on your system, Vegas will recognize it and allow h.264 output. It is freeware. No idea if it will work with the trial version or not. No idea if it supports 1080.
Audio may still be a problem. Will your camcorder record in stereo instead of 5:1? (Audio Mode, page 69 in your manual.)http://www.videohelp.com/tools/ffmpeg
I can't find any way to use FFMPEG in Vegas. As best I can find, it's just a command line utility (with support for a zillion formats and codecs), but I haven't found a way to "install" codecs into your system with it. If you see any references to how to use it directly in Vegas, I'd love some pointers.
What I did find is a way to add a lossless, high quality video codec to your system (huffyuv), render using that in Vegas (to a huge file), then take that file and use FFMPEG on it to render to h.264. There's a tutorial describing how to do this here. It's not for the faint of heart and, unfortunately, seems to show how complicated this all can get. What a mess!
The bugaboo seems to be that neither Smugmug nor any of the free converters can read the Sony AVCHD out of the camera. I wonder why that is?
I have the complete Adobe Suite and have been using Flash Video Encoder to make FLVs with On2 VP6 and getting great results. I just did one this morning that was a 600mb DV format 29.97fps @ 640x480, and the FLV ended up at 18mb and looks great. Unfortunatelly, SmugMug doesn't accept FLV. I compressed the same file in QTpro with H.264 and the file ended up being 213mb and didn't look as good (got to figure out interlacing issue in QTpro). This could be due to audio codec, as I don't knwo them as well as video.
I'm new to the forum and will dig around to find out what other people have been using.
Hi, we do accept flv!:http://wiki.smugmug.net/display/SmugMug/Video+Formats
We use length because it's a bit easier to understand for many.
When I shoot a video clip with my video camera, I really have no idea how large the file is going to be, but I always know how long it is. Also, a video can grow and shrink in file size depending upon many factors such as video compression, audio bit rate, etc, etc. Whereas the length of the video is a constant.
I've just never seen storage limits based on time. Wierd convention IMO.
Every time I try to convert a 1920x1080 mpg file to h.264 in Super the sound ends up out-of-sync with the video. This is becoming a real problem for me because some of my videos are too large to upload to Smugmug. When Smugmug does the automatic conversion post-upload it stays synched; I can't explain or fix it.
Well, I did finally succeed in getting what I wanted up onto Smugmug. Here's what I had to do (I still think there has to be a better way):
So anyway, I wouldn't say I'm pleased with all the steps of the workflow and heaven knows this is certainly not something most people can figure out how to do, but I at least know how to get a video up online now.