HELP! Problem updating 20D firmware

T4TotsT4Tots Registered Users Posts: 198 Major grins
edited May 20, 2005 in Cameras
Right now I am sitting at my desk and the LCD of my 20D says

Firmware update program
updating now
94% done

Warning: DO NOT turn off Power switch or touch any buttons



Now my problem is it has been at 94% for over 15 minutes....can I turn it off and start the procedure over or am I going to totally screw it up???
Tina Folsom :lust
Photographer and Mom of Four!
_____________________________________
http://tinafolsomphotography.com

Comments

  • AndyAndy Registered Users Posts: 50,016 Major grins
    edited May 18, 2005
    were you following these instructions?
    Andy

    Portfolio • Workshops • Facebook • Twitter
  • T4TotsT4Tots Registered Users Posts: 198 Major grins
    edited May 18, 2005
    andy wrote:
    were you following these instructions?
    yes! I read through them online and then downloaded the pdf and followed it exactly. Still stuck...can I turn power off?
    Tina Folsom :lust
    Photographer and Mom of Four!
    _____________________________________
    http://tinafolsomphotography.com
  • T4TotsT4Tots Registered Users Posts: 198 Major grins
    edited May 18, 2005
    I took a big chance and just turned it off removed the battery to get the LCD to turn off (it didn't when I turned power off). Then I put the battery back in and turned the power back on it asked me to upgrade and I hit set and it went all the way to 100% and completed WHEW!

    Thanks!
    Tina Folsom :lust
    Photographer and Mom of Four!
    _____________________________________
    http://tinafolsomphotography.com
  • OlgaJOlgaJ Registered Users Posts: 146 Major grins
    edited May 18, 2005
    andy wrote:
    were you following these instructions?
    Many users have come across the same thing. A freeze at 94% completion. Everyone has sweated it but in the end, after removing the battery, everything is fine.

    Olga
  • Sheila SmartSheila Smart Registered Users Posts: 45 Big grins
    edited May 19, 2005
    It would be interesting to see if you have higher noise after downloading the firmware as on other forums, several folk have complained of this.

    Cheers
    Sheila
    Sheila Smart
    Canon 20D and various Ls
    Gallery: http://www.pbase.com/sheila

    All the technique in the world does not compensate for the inability to notice - Elliott Erwitt
  • DoctorItDoctorIt Administrators Posts: 11,951 moderator
    edited May 19, 2005
    I think Winger's now possessed and dead 20D did this too. Why do I get the feeling Canon made some major errors on a whole big run of this camera? I'm very scared to pick up a used one at some point down the road...
    Erik
    moderator of: The Flea Market [ guidelines ]

  • T4TotsT4Tots Registered Users Posts: 198 Major grins
    edited May 20, 2005
    Oh Joy
    Sheila Smart wrote:
    It would be interesting to see if you have higher noise after downloading the firmware as on other forums, several folk have complained of this.

    Cheers
    Sheila
    Well, I had an excellent session yesterday, so I hope it doesn't come down with anything later.
    Tina Folsom :lust
    Photographer and Mom of Four!
    _____________________________________
    http://tinafolsomphotography.com
Sign In or Register to comment.