Print questions

Montec

I am making some signage for a local school that will hang out side of classrooms.
They will be 16x24 in size printed on canvas.

They need to be the same on the front and back as they will be hanging from steel hangers made by their senior shop class and be visible when walking down the hallways from both sides. (I am going to leave 1/2 inch on top for them to secure the hangers)

My question is: Will I be able to have Bay photo print these on their 'Gator Foamboard' and mount them like I describe above? Or would it be better to get two of each and have them glued together.

I can print these myself on my Epson 7880 but then I have to take them out and get them mounted and it would end up being very costly and time consuming. I was hoping I could just upload the images and get them finished here.

Sample of what they will look like below, I am printing the frame right on the canvas.

**UPDATE** I checked with BayPhoto and they cannot do this. Anyone had any experience with gluing a couple together?

fredjclaus

That would really be a question best answered by Bay Photo, but from what I know about those boards, is they are only printable on one side. Your best bet is to get two and glue them together. If you call Bay, they might be able to do that for you.

Andy

they can be stuck together easily... I've done it.

fredjclaus

Thanks Andy, I knew it could be done, but didn't know how easy it was to do on your own.