Ring shot

joshhuntnmjoshhuntnm Registered Users Posts: 1,924 Major grins
edited June 29, 2009 in Weddings
thanks, again, Dawson for letting me use the 70 - 200 IS 2.8

576798117_kBGsz-L.jpg

Comments

  • Scott_QuierScott_Quier Registered Users Posts: 6,524 Major grins
    edited June 29, 2009
    Warning - a rough comment comming :D

    Yup, the 70-200 f/2.8L IS is an awsome lens. Too bad the focus was off in this shot! You got her bodice and his right hand in focus.
  • JDubJDub Registered Users Posts: 171 Major grins
    edited June 29, 2009
    Have to agree with scott, nice shot, but its out of focus. I hate when that happens to me!! I usually take about 5 of the same shot, with various focusing and aperture settings to make sure I get it. Nice angle and cropping however!
    Josh Westbrook
    ---
    Atlanta, GA
  • bob2525bob2525 Registered Users Posts: 4 Beginner grinner
    edited June 29, 2009
    Many times the focusing limiter switch is forgotten about. If it's set to 3 meters instead of 1.5 and you're trying to focus on something that's less than 3, this can happen. (Never to me of course) :-)
    Just my .02

    Bob
  • joshhuntnmjoshhuntnm Registered Users Posts: 1,924 Major grins
    edited June 29, 2009
    bob2525 wrote:
    Many times the focusing limiter switch is forgotten about. If it's set to 3 meters instead of 1.5 and you're trying to focus on something that's less than 3, this can happen. (Never to me of course) :-)
    Just my .02

    Bob

    this is my son's glass, so i never read the instructions. Explain that focus limiter to me, please?
  • bob2525bob2525 Registered Users Posts: 4 Beginner grinner
    edited June 29, 2009
    It's my understanding that this switch helps the lens to lock onto closer subjects if set at the 1.5 meter setting. My older 70-200 f2.8 non-stabilized and my newer 300 f4 IS doesn't lock onto subjects that are under 3 meters if set at 3 meters. I hope this helps, and if someone can explain it better, please feel free to do so.

    Bob
  • mmmattmmmatt Registered Users Posts: 1,347 Major grins
    edited June 29, 2009
    yeah, it helps the lens focus faster at a given range but it bites you sometimes if you don't change it. My 135f2L has the same kind of switch on it. How are you picking your focus points josh? Are you using the multi controller, center point, or are you using all the points at once? Using the multi controller helps you out quite a bit and helps with comps too. pulling your focus point from the center of the frame is really helpful when composing.

    Matt
    My Smugmug site

    Bodies: Canon 5d mkII, 5d, 40d
    Lenses: 24-70 f2.8L, 70-200 f4.0L, 135 f2L, 85 f1.8, 50 1.8, 100 f2.8 macro, Tamron 28-105 f2.8
    Flash: 2x 580 exII, Canon ST-E2, 2x Pocket Wizard flexTT5, and some lower end studio strobes
  • joshhuntnmjoshhuntnm Registered Users Posts: 1,924 Major grins
    edited June 29, 2009
    mmmatt wrote:
    yeah, it helps the lens focus faster at a given range but it bites you sometimes if you don't change it. My 135f2L has the same kind of switch on it. How are you picking your focus points josh? Are you using the multi controller, center point, or are you using all the points at once? Using the multi controller helps you out quite a bit and helps with comps too. pulling your focus point from the center of the frame is really helpful when composing.

    Matt

    I am used to using my 24 - 105 f/4 L. with it being f/4 i have gotten in the habit of using the multipoint. the DOF is wide enough that it doesn't get me in trouble. I just need to be more careful with this 2.8
  • joshhuntnmjoshhuntnm Registered Users Posts: 1,924 Major grins
    edited June 29, 2009
    fyi
    the focus problem is made worse, by the way, because this is a crop. this is the full pic

    577681725_Lxgp6-M.jpg
Sign In or Register to comment.