Step up rings question

Wag More

Hi all...

I am thinking about using step-up rings so that all my lenses can use 77mm filters. So far so good but what about putting a 58mm to 77mm step-up ring on my 50mm f/1.4? Is that too big of a jump?

Thanks.

- Rich

Art Scott

should work just fine....look funny unless you get larger screw-in lens hood.........
Instead of step rings...what about going with Lee or another rectangular filter that uses holders......another thing I like them is that they don't seem to get stuck to the lens the way a lot of screw-in filters do...........

craig_d

I don't think there really is such a thing as "too big of a jump" in step-up rings as long as you're comfortable with the result. Bear in mind, as Art notes, that you may not be able to use your lens' standard hood and a step-up ring at the same time.

Personally I prefer to just buy each size of filter that I need, and try not to buy lenses that require too many different filter sizes.

pathfinder

I use step up rings frequently.

Some of Canon's lenses use a 72mm filter, even though the typical filter diameter for most of Canon lenses is 77m. I use a 72->75mm step up ring on my 24 T&S and my 135 f2 L, routinely. This allows me to just carry 77m filters, and not have to carry two of every filter when walking about in the field.

I use rectangular filters, 4x6 inch and smaller sizes for grad neutral density control, but you have to be careful with them as you can get reflections from the lens or carrier in your image at times. Screw in filters help prevent this issue. but screw in graduated NDs just don't work as well for other reasons.

If you use step up rings, it might be a good idea to purchase a couple appropriate filter wrenches as the same time. You'll need them

Step up rings are inexpensive, and quite useful to me. The 58mm to 77mm is quite handy as well. 67mm->77mm helps if you carry some of Tamrons lenses as well, as 67mm is a frequent Tamron dimension.

Manfr3d

I have a 58->72 and a 72->77mm adapter .. looks wierd, but works

ziggy53

I do recommend quality brass rings if at all possible. The aluminum rings tend to warp and stick too easily for me.