NikSoftware Sharpener Pro, Setting?

BriangoodwinstudioBriangoodwinstudio Registered Users Posts: 2 Beginner grinner
edited January 8, 2012 in Finishing School
What's the best output sharpening method to use with the software? Continuous halftone, halftone, or hybrid device? I'll be using Bayphoto.

Thanks for any advice.

Brian Goodwin

Comments

  • BriangoodwinstudioBriangoodwinstudio Registered Users Posts: 2 Beginner grinner
    edited January 7, 2012
    After, researching Niksoftware's website I found the answer. I thought posting it would help those that may come across this issue.

    I print at a photo lab or with an online printing facility, what settings do I use?

    If you print with a lab or an online printing facility, use the Continuous tone Output method in the Output Sharpener filter. Consult your lab to find the resolution they will be printing the image at and use that information to set your Printer Resolution.

    Also, if you are sharpening with Sharpener Pro 3.0 and printing at a lab or an online printing facility, please ask the printers to turn off any sharpening they may apply.

    Brian Goodwin Studio
  • arodneyarodney Registered Users Posts: 2,005 Major grins
    edited January 8, 2012
    Start here: http://www.creativepro.com/story/feature/20357.html

    I think you’ll see, the answer is somewhat complicated.
    Andrew Rodney
    Author "Color Management for Photographers"
    http://www.digitaldog.net/
Sign In or Register to comment.