Current thinking in card readers?

Zanotti

I have an older Sandisk card reader that has served me well, but has become problematic. (Although I dont really understand how they can fail!) This one takes several plug in attempts to get the computer to recognize it.

Anyway - time for a new one! What's the curent standard? What (USB2) style has most value/ performance ?

Z

jww

I've always had good luck with my SanDisk reader. I am wondering if yours failed due to the USB plug. Mine sits in a cradle and can be taken out. The reader can then be plugged in with another usb cable. If you had a similar one, I was wondering if that might make it register better.

Regardless, if mine failed I would get another SanDisk in a heartbeat. Good luck!

ziggy53

In my experience when a USB device starts to fail at connection, it's generally because of either contention with other USB devices (often the result of poorly written device drivers somewhere) or a registry issue (Windows specific).

Hardware can play a part, but it's generally more catastrophic failure when it's hardware.

Sandisk and Lexar are 2 proven brands, but specific operating system and hardware (computer, built-in card readers, etc.) can affect the operational outcome.

With CF cards, proper pairing of UDMA cards to UDMA readers is also important, and using older cards in a UDMA reader may not be fast at all.

The following pages may give you some insight into the issues and some guidance on purchases (although the data is getting dated now):

http://www.robgalbraith.com/bins/reader_report_multi_page.asp?cid=6007-9392
http://www.robgalbraith.com/bins/reader_report_multi_page.asp?cid=6007-9438

Zanotti

Here's what I have now:

SanDisk Extreme III USB (original version)
This CompactFlash and SD/SDHC USB 2.0 reader is one of the most dependable and goof-proof readers we've ever used. Though it's a couple of years old now and not the speediest, it remains a favourite here because it just works.




I would agree it works rather well. Sandisk does not have a current direct replacement. The similar Lexar is also old.

I would prefer one that is just CF or like this CF and SD. I dont use the other 14 type memory cards, so it just adds bulk complexity and cost.


Oh, I always forget computer specific stuff. I have Win7, a fairly modern Dell Laptop running most current software. No other periferals, other than the single built in SD slot.

ziggy53

The SanDisk Extreme III USB (original version) is a solid card reader, but apparently not capable of UDMA. This will affect transfer speeds for many current Compact Flash cards.

Have you updated to this version of the Sandisk Launchpad?:

http://forums.sandisk.com/t5/All-SanDisk-USB-Flash-Drives/U3-Windows-7-update-now-available/m-p/156945/highlight/true#M1

For current card readers, I agree that the all-in-one reader approach is generally less than desired for performance and reliability. That said, unless you want to upgrade to USB 3, your best bet might be an all-in-one reader.

A couple that get good marks:

http://www.bhphotovideo.com/c/product/735289-REG/Delkin_Devices_DDREADER_41_Universal_Card_Reader.html

http://www.bhphotovideo.com/c/product/735302-REG/Lexar_LRW024URBNA_Multi_Card_24_in_1_USB_Reader.html

lifeinfocus

Check out Puget Systems analysis at http://www.pugetsystems.com/labs/articles/Card-Reader-Comparison-USB-2-0-vs-USB-3-0-126

If you don't have USB 3.0 look into http://www.newegg.com/Product/Product.aspx?Item=N82E16815201035

divamum

Bumping this older thread as my old card reader is getting cranky. Looks like a spider or other bug crawled onto the pins and died there (????!!!!!) and even though I cleaned it out, it's a bit iffy now. Plus the pins are bending and it's getting harder to insert the cards (that was true before the bug incident).

In any case, any reccos since April? Sadly, I don't have USB 3.0, so any reader needs to be backwards compatible with 2.0...

Gary752

divamum wrote: »

Bumping this older thread as my old card reader is getting cranky. Looks like a spider or other bug crawled onto the pins and died there (????!!!!!) and even though I cleaned it out, it's a bit iffy now. Plus the pins are bending and it's getting harder to insert the cards (that was true before the bug incident).

In any case, any reccos since April? Sadly, I don't have USB 3.0, so any reader needs to be backwards compatible with 2.0...

The last link that Ziggy posted earlier for the Lexar card reader closes down to keep anything from getting in the card slots. I own this one and can honestly say that the memory card will accurately align before even getting close to the pins, thus eliminating the chance of pins bending.

GaryB

Matthew Saville

divamum wrote: »

Bumping this older thread as my old card reader is getting cranky. Looks like a spider or other bug crawled onto the pins and died there (????!!!!!) and even though I cleaned it out, it's a bit iffy now. Plus the pins are bending and it's getting harder to insert the cards (that was true before the bug incident).

In any case, any reccos since April? Sadly, I don't have USB 3.0, so any reader needs to be backwards compatible with 2.0...

I highly recommend getting a card reader that is USB 3.0, even if you don't have such functionality yet. It will be worth it in the long run.

I have tried card readers from Transcend, Pretec, and Kingston. I recommend the Transcend and Kingston ones quite highly:

https://www.amazon.com/dp/B0056TYRMW/ref=as_li_ss_til?tag=slrlounge01-20&camp=0&creative=0&linkCode=as4&creativeASIN=B0056TYRMW&adid=0HG95J8XS8SNCB3E6WPF&
https://www.amazon.com/dp/B005ES0YYA/ref=as_li_ss_til?tag=slrlounge01-20&camp=0&creative=0&linkCode=as4&creativeASIN=B005ES0YYA&adid=16ZP0SMS3HHDKP6GHBEP&

divamum

Thanks guys! Matt, I reckoned I would get USB 3 - as long as it's a backwards-compatible unit, no problem (and wasn't sure if all of them are, hence the mention....)

I kinda like the closeable Sandisk, but it looks like they don't make it anymore; the Kingston looks pretty good. Time to go do some Amazon Prime-ing, methinks....

Gary752

There is a USB 2 & 3 version of the closeable Lexar one, and the USB 3 version is backwards compatable.

GaryB

divamum

Ordered the newer version of the Lexar - I like that you can close it. It was a little more than the Transcend, but users comment that it runs faster than others even on USB 2.0, which can only be a help with the huge 5dii and 7d raw files I often have!! I'll let you know what it's like

BradfordBenn

Hey DivaMum-

Just remember a few things, as I spend way too much time troubleshooting USB at work.
1) It will only transfer as fast as your receiver (hard drive) can write the data.
2) USB is interrupt driven which means if you are doing a transfer to an external USB hard drive it will take longer.

divamum

Ummmmm.... WOW. Even on USB 2.0, it's probably 3x (maybe even 4x) as fast as my old Sandisk reader. Colour me impressed - that was an excellent $35 upgrade!!!

ian408

A suggestion for you Windows users. If you are having trouble with the device and it does not appear to be hardware related, you can remove and reinstall the USB drivers from the system. That may help. Also be sure to apply any OS updates.

As far as USB 3 vs 2. I always suggest weighing the cost/benefit before buying. For me, USB 3 is "nice to have" meaning the direct benefit does not warrant the extra cost.

divamum

Most of them seem to be coming in as USB 3.0 now. As long as it's backwards-compatible, no problem. This one was a bit more $, but it has the closeable slot (see above for reasons why that appeals!) and it got great reviews. I'm happy with it, that's for sure! Can't believe the difference....