Rust dressed to the Nines...

toragstorags Registered Users Posts: 4,615 Major grins
edited August 8, 2012 in Other Cool Shots
Agonizing for a couple of years for what to hang in this corner... I thought this was a good choice

DSC5131-XL.jpg

Printed on metal, it pops
Rags

Comments

  • black mambablack mamba Registered Users Posts: 8,325 Major grins
    edited August 6, 2012
    Dang, Rags, that's pretty impressive. Those three shots presented side by side like that make for a stunning arrangement. Beautiful work.clap.gif

    Tom
    I always wanted to lie naked on a bearskin rug in front of a fireplace. Cracker Barrel didn't take kindly to it.
  • rwellsrwells Registered Users Posts: 6,084 Major grins
    edited August 6, 2012
    black mamba wrote: »
    Dang, Rags, that's pretty impressive. Those three shots presented side by side like that make for a stunning arrangement. Beautiful work.clap.gif

    Tom


    15524779-Ti.gif
    Randy
  • EaracheEarache Registered Users Posts: 3,533 Major grins
    edited August 7, 2012
    Well-done installation.... the triptych complements the room and the painting nicely.
    Eric ~ Smugmug
  • toragstorags Registered Users Posts: 4,615 Major grins
    edited August 7, 2012
    thanks for the comments guys, much appreciated
    Rags
  • DaddyODaddyO Registered Users Posts: 4,466 Major grins
    edited August 7, 2012
    Prints look great. You have placed them well and your consideration for that shows. Sweet match for your room. thumb.gif

    Makes me want to go bang on some rust and see what comes out mwink.gif Might even get up the $ for metal prints as I have never had one done.
    Michael
  • toragstorags Registered Users Posts: 4,615 Major grins
    edited August 7, 2012
    DaddyO wrote: »
    Prints look great. You have placed them well and your consideration for that shows. Sweet match for your room. thumb.gif

    Makes me want to go bang on some rust and see what comes out mwink.gif Might even get up the $ for metal prints as I have never had one done.

    Do it. The saturated colors really pop. These are mounted on aluminum plate (3/16 +/-) with a neat mounting block behind )1/2" off wall.

    Bayphoto did the job
    Rags
  • JuanoJuano Registered Users Posts: 4,890 Major grins
    edited August 7, 2012
    torags wrote: »
    Do it. The saturated colors really pop. These are mounted on aluminum plate (3/16 +/-) with a neat mounting block behind )1/2" off wall.

    Bayphoto did the job

    The prints look great (nice dining room by the way). Did your prints match fairly well with your screen or did they (or you) have to do some adjustments?
    Cristóbal


    www.mind-driftphoto.com
  • toragstorags Registered Users Posts: 4,615 Major grins
    edited August 7, 2012
    Juano wrote: »
    The prints look great (nice dining room by the way). Did your prints match fairly well with your screen or did they (or you) have to do some adjustments?

    Some adjustments?.... I'm an unrepentant rust junkie; high sat, over sharpened... unreal... wings.gif

    Actually a natural abstract....

    Thanks for your kind words
    Rags
  • JuanoJuano Registered Users Posts: 4,890 Major grins
    edited August 7, 2012
    torags wrote: »
    Some adjustments?.... I'm an unrepentant rust junkie; high sat, over sharpened... unreal... wings.gif

    Actually a natural abstract....

    Thanks for your kind words


    That's all fine, I know what you mean :D My disappointments have been mostly on brightness and it is hard to understand what the print will look like.
    Cristóbal


    www.mind-driftphoto.com
  • DaddyODaddyO Registered Users Posts: 4,466 Major grins
    edited August 8, 2012
    torags wrote: »
    Do it. The saturated colors really pop. These are mounted on aluminum plate (3/16 +/-) with a neat mounting block behind )1/2" off wall.

    Bayphoto did the job
    Good to know these things Rags and I appreciate your encouragement to just do it. You do the mounting or is it simply done that way from the printer folks? I have no idea about how it goes but soon will have :D
    Michael
  • toragstorags Registered Users Posts: 4,615 Major grins
    edited August 8, 2012
    DaddyO wrote: »
    Good to know these things Rags and I appreciate your encouragement to just do it. You do the mounting or is it simply done that way from the printer folks? I have no idea about how it goes but soon will have :D

    Mount comes installed, just drive a nail. Here something to give you an idea of thickness and the mount; it's a nice product.

    i-CMd2W87-XL.jpg

    i-d94KGGG-XL.jpg

    BTW, if you sell your stuff, they drop ship (no commercial benefit to me from Bayphoto), they just did a good job

    good luck
    Rags
Sign In or Register to comment.