Flash Meter to start with
alaios
Registered Users Posts: 668 Major grins
Dear all,
I am looking for a flash meter to reduce considerably the time I need to set up my lights. I know that for example the Sekonic L-758DR is a very good one but the price tag is a bit on the expensive scale (around 500 euros).
I was wondering if you have any cheaper alternative that you could suggest me.
I would like to thank you for your reply
Regards
Alex
I am looking for a flash meter to reduce considerably the time I need to set up my lights. I know that for example the Sekonic L-758DR is a very good one but the price tag is a bit on the expensive scale (around 500 euros).
I was wondering if you have any cheaper alternative that you could suggest me.
I would like to thank you for your reply
Regards
Alex
0
Comments
Alex
Sekonic does offer a Litemaster Pro L-478D Light Meter at B&H for $339.00 which should easily meet your price of less than 500 euros. - http://www.bhphotovideo.com/c/product/221078-REG/Sekonic_401_358_L_358_Flash_Master_Meter.html
Moderator of the Technique Forum and Finishing School on Dgrin
There are few things that I do not understand
I am trying to find out which of the models you suggested me have 1 degree spot metering.
In the specs sheet like this one for example
http://www.sekonic.com/downloads/l-358_english.pdf the word spot is only given once ...
The other think is about the radio triggering. Currently I am on some cheap yongnuo triggers. Does the flash meter support all the triggering wireless system (it might be that they use just the same frequency) or you have to couplie it with appropriate triggers.
That is all for now
Alex
The L478 flash meter from B&H comes with the radio trigger for $399.
Incident metering offers significant advantages over reflective metering if you can position the meter close to the subject in the lighting that will be used for photographing. For reflective spot metering, I found the meter built into my DSLR much more useful than the narrow angle attachment for the L-358. I never use the L-358 units reflective metering mode - it was designed as an incident meter and that's how I used it.
Moderator of the Technique Forum and Finishing School on Dgrin
The reason for the spot metering was to get that tiny 1 degree metering accuracy. My camera also has a spot meter but I do not think is small enough to be 1 degree.
Regards
Alex
Yes, that's what I do.
Moderator of the Cameras and Accessories forums