Another Simple Minded Exposure Compensation Question
When I was shooting in aperture priority mode I would use exposure compensation to, well, compensate exposure. I have moved to shooting in manual mode all the time now and I'm wondering what exposure compensation changes in this case. It doesn't change the aperture, the shutter speed or the ISO but it does show the exp. comp setting in the exif data. So what is changed? I'm using a Nikon d70.
0
Comments
Catapultam habeo. Nisi pecuniam omnem mihi dabis, ad caput tuum saxum immane mittam
http://www.mcneel.com/users/jb/foghorn/ill_shut_up.au
Catapultam habeo. Nisi pecuniam omnem mihi dabis, ad caput tuum saxum immane mittam
http://www.mcneel.com/users/jb/foghorn/ill_shut_up.au
That is the obvious part.
What may not be obvious is that you are now under manual control, and if you change scenes, the exposure settings will still be the same. Your meter may not read +2EV anymore, and you may get an under or overexposed shot unless you check your settings and light levels before taking your next photo in the new scene.
In the auto and semi-auto modes, the EV readout is showing you the compensation, in manual mode it is a live light meter that changes as the scene changes. You use that information to manually alter your exposure settings until the meter is reading what you feel it should.
Some really good information can be had on using a meter (spot or partial) to determine exposures by researching the zone system as it applies to exposure (skip the info on making prints).
A brief appetizer can be had here, but I do encourage your own research and experimentation to fully benefit from the technique:
http://www.digitalsecrets.net/Sony/AdvancedKnow.html
And this is always the main course when it comes to exposure. It takes a while to fully digest and implement, but the effort is well worth it:
http://www.fredparker.com/ultexp1.htm
"Failure is feedback. And feedback is the breakfast of champions." - fortune cookie
Great article Shay. Looks like I'll be working on this research tonight. Thanks.
Some of My Photos: app.electrikfolio.com/v/steven-hatch
Thanks to everyone for the replies. Thanks to Shay for the links- lot's of good stuff there. I did a few experiments with my d70. Here is what I found out: in Manual mode changing exposure compensation does not have any affect on the captured image. The setting is caputured, though, in exif data as I had thought. Changing exposure compesation settings does change the meter though. If I have exp. comp. set to zero and I spot meter something that is middle gray the meter shows the indicator at the center. If I set the exp. comp. to +1 (over exposure) and point it at the same spot the meter reads one stop underexposed. Now that I've played with this I find it extremely cool. If I'm shooting under some conditions where I want to overexpose, such as on snow I can set the exp. comp. to +2 and then meter as normal and I'll get the overexposure I need. Really useful in my opinion. Again, thanks for the help- I feel I've made a bit of a leap here in using my meter.