fireworks
Aaron Wilson
Registered Users Posts: 339 Major grins
What is the best way to shoot fire works? is it just to use the bulb mode? or try to shot it.
0
Comments
I'm no expert on this, but I would definitely shoot bulb, since I would want to time my exposures to the action. I'd shoot low ISO, f8, rattle some off and see where I stand. I think you'd probably end up shooting f11, though...or maybe higher.
Dgrin FAQ | Me | Workshops
Aaron, this article was posted on a previous thread...
http://www.nikonnet.com/dyn/articles/article_detail/227.html
I have used the technique for lightning and it works great.
Good luck!
spudjer
Gort! Klaatu barada nikto!
I mean ISO 100, 4 sec. Play around with f/8..f/11. If you shoot RAW, set to f/10 and you'll get away with it:-).
Our very own Mike Lane recently published an excellent series of fireworks images, just check out his settings and find the ones you likie most of all:-)
HTH
Can somebody explain to me how the card trick is different form the regular bulb (i.e. manual stop) mode? At the exposures of several seconds long (which are pretty much standard for fireworks) mirror-caused vibrations can not possibly affect the image. So this card thing only adds a level of complexity, since now you have to:
- Keep the card in from of the lens
- Open the shutter
- Remove the card
- Close the lens with the card
- Close the shutter
instead of simply:- Open the shutter
- Close the shutter
I mean, it's sounds tres cool and very pro, but is is worth it?TIA
http://redbull.smugmug.com
"Money can't buy happiness...But it can buy expensive posessions that make other people envious, and that feels just as good.":D
Canon 20D, Canon 50 1.8 II, Canon 70-200 f/4L, Canon 17-40 f/4 L, Canon 100mm 2.8 Macro, Canon 430ex.
useful
The card thing is more useful if you don't have a remote release. If you actually have to put your hands on and off the camera to trigger the shutter you are introducing a lot more vibration than just mirror slap.
The one thing you can do with the card is get multiple bursts in one exposure that were not at the same time. You can "open" and "close" the shutter as many times as you want in one shot.
If you do have a remote release then bulb works great and if you are still worried about vibration from the mirror, use MLU.
Even then if want multiple bursts in one shot that weren't together to begin with, there's always Photoshop or whatever your photo editing application of choice is.