I like them all......my only nit is that dangling hand of the groom in #3......I alway have the groom hold on to the bride with both hands or at the very least helping her hold her bouquet of flowers.....but over all.....VERY GOODbow
I will try to correct the skin tones. Any tricks to perform this using Capture NX? What should I look for?
JY
For one thing, you're too dark.
Here I've only raised the luminance of the shot through curves. This is not an ideal correction. The color still is not right, there is detail getting lost in the gown. This is only to illustrate the importance of having the right luminance for skin as well as color.
These are really nice. I agree with the comments already made, and would only add that in the shot of the grrom with his groomsmen, it looks a tad oversharpened or something. Especially the man on the left end. Something just strikles me as odd about him. Then again, my eyes ain't what they used to was.
Oh, and the solo shot of the groom is fantastic.
John :
Natural selection is responsible for every living thing that exists.
D3s, D500, D5300, and way more glass than the wife knows about.
I'm jealous that you could get time with just the two of them. I have the hardest time getting my bride and groom away to take some shots of just the two of them! Congrats on a few great ones!
I will try to correct the skin tones. Any tricks to perform this using Capture NX? What should I look for?
JY
JY,
I like the shots; it looks like it was a nice wedding. This is my first attempt at modifying someone else's work, so please let me know if you would like me to take it down and I will do so.
You asked for specifics in Capture NX, so here is my little attempt. If I had the RAW file to play with, I would most likely have started in the Picture Control section. Which Camera and color mode settings were you using? I use a little ol' D40X and I'm finding that my default settings (Mode 1a, Saturation Normal and auto tone comp) are leaving skin tones a little too ruddy. I'll be testing some of the stock settings for my own shooting to bring the skin tones into better alignment out of the camera. Once I was out of the picture control area, I probably would've used the LCH -> Chroma adjustment to track down the orangish/reddish color and de-saturated it a bit to see what I could accomplish. That would probably tone down the groom's face as well.
Since we're only playing with a small JPG here, I used control points. The first image here show the 4 points I added with the selection and details. Mainly, I reduced the red channel, decreased the warmth and/or saturation and added a little brightness or contrast as needed. BTW, I'm using CNX2 now so the controls may look a little different.
Here's what my shot ended up looking like. I'm battling a calibration issue at the moment with my huey, so the skin tone may still be off. I just hope that this gives you some ideas to play with.
I like the shots; it looks like it was a nice wedding. This is my first attempt at modifying someone else's work, so please let me know if you would like me to take it down and I will do so.
You asked for specifics in Capture NX, so here is my little attempt. If I had the RAW file to play with, I would most likely have started in the Picture Control section. Which Camera and color mode settings were you using? I use a little ol' D40X and I'm finding that my default settings (Mode 1a, Saturation Normal and auto tone comp) are leaving skin tones a little too ruddy. I'll be testing some of the stock settings for my own shooting to bring the skin tones into better alignment out of the camera. Once I was out of the picture control area, I probably would've used the LCH -> Chroma adjustment to track down the orangish/reddish color and de-saturated it a bit to see what I could accomplish. That would probably tone down the groom's face as well.
Since we're only playing with a small JPG here, I used control points. The first image here show the 4 points I added with the selection and details. Mainly, I reduced the red channel, decreased the warmth and/or saturation and added a little brightness or contrast as needed. BTW, I'm using CNX2 now so the controls may look a little different.
Here's what my shot ended up looking like. I'm battling a calibration issue at the moment with my huey, so the skin tone may still be off. I just hope that this gives you some ideas to play with.
This is really good, many thanks. I also find the control point very useful. I ended up adjusting the brightness (+18) and the Hue (+7 to +14). Sometimes reducing the red channel helps a little as well. Also, I realized that I edited the image using my laptop and the screen is way too bright.
This is really good, many thanks. I also find the control point very useful. I ended up adjusting the brightness (+18) and the Hue (+7 to +14). Sometimes reducing the red channel helps a little as well. Also, I realized that I edited the image using my laptop and the screen is way too bright.
Your tutorial is really good.
Cheers
JY
JY,
You're welcome. I'm sure the bride and groom are going to love the final results. I'm just a rookie with these things so I'm glad my post was at least useful. Enjoy processing the rest of them!
Comments
Oh, WB/skin tones - On my monitor, you have some pretty heavy red or orange going there.
My Photos
Thoughts on photographing a wedding, How to post a picture, AF Microadjustments?, Light Scoop
Equipment List - Check my profile
the orange on my screen is only questionable on the last one
I like the idea of the last one but the angle with the shoes is ...?
Keith Tharp.com - Champion Photo
I will try to correct the skin tones. Any tricks to perform this using Capture NX? What should I look for?
JY
For one thing, you're too dark.
Here I've only raised the luminance of the shot through curves. This is not an ideal correction. The color still is not right, there is detail getting lost in the gown. This is only to illustrate the importance of having the right luminance for skin as well as color.
(Click for larger image.)
Dgrin FAQ | Me | Workshops
Oh, and the solo shot of the groom is fantastic.
Natural selection is responsible for every living thing that exists.
D3s, D500, D5300, and way more glass than the wife knows about.
:barb
http://www.kc1stphotography.com
2 Canon Rebel XSi
Tamron 70-200mm f2.8
2 Canon 14-55mm
Canon 55-250mm f4.0
Canon 580EX
Canon 580EX II
*
http://member.onemodelplace.com/member.cfm?P_ID=214042
D3, and other Nikon goodies
Shilliday Photography
Blog
Facebook
I like the shots; it looks like it was a nice wedding. This is my first attempt at modifying someone else's work, so please let me know if you would like me to take it down and I will do so.
You asked for specifics in Capture NX, so here is my little attempt. If I had the RAW file to play with, I would most likely have started in the Picture Control section. Which Camera and color mode settings were you using? I use a little ol' D40X and I'm finding that my default settings (Mode 1a, Saturation Normal and auto tone comp) are leaving skin tones a little too ruddy. I'll be testing some of the stock settings for my own shooting to bring the skin tones into better alignment out of the camera. Once I was out of the picture control area, I probably would've used the LCH -> Chroma adjustment to track down the orangish/reddish color and de-saturated it a bit to see what I could accomplish. That would probably tone down the groom's face as well.
Since we're only playing with a small JPG here, I used control points. The first image here show the 4 points I added with the selection and details. Mainly, I reduced the red channel, decreased the warmth and/or saturation and added a little brightness or contrast as needed. BTW, I'm using CNX2 now so the controls may look a little different.
Here's what my shot ended up looking like. I'm battling a calibration issue at the moment with my huey, so the skin tone may still be off. I just hope that this gives you some ideas to play with.
If you don't already have it, I recommend Jason Odell's e-book on Capture NX (http://www.luminescentphoto.com/).
I sure someone with way more skill and knowledge around here can point out better ways, but thanks for the opportunity to try. Happy Processing!
Thanks,
Matt
That is really good
:barb
http://www.kc1stphotography.com
2 Canon Rebel XSi
Tamron 70-200mm f2.8
2 Canon 14-55mm
Canon 55-250mm f4.0
Canon 580EX
Canon 580EX II
Your tutorial is really good.
Cheers
JY
JY,
You're welcome. I'm sure the bride and groom are going to love the final results. I'm just a rookie with these things so I'm glad my post was at least useful. Enjoy processing the rest of them!
Matt