Is my calibration correct?

alaiosalaios Major grinsPosts: 668Registered Users Major grins
edited June 1, 2015 in Digital Darkroom
Dear all

I have bought a new Dell monitor (24 inches) with 99% rgb support. The monitor comes precalibrated from Dell (there was also a leaflet in my screen box for that).

I tried though my spyder 4 calibrator.

The calibrated process started and firstly reminded me that my screen "brightness" is very high and I have to lower it considerably.



Then the calibration finished but to be honest everything turned more "reddish" as a feeling (Before it was too blueish).

It also found correctly that my screen supports 99% of srgb. I wonder though

-What dell means with precalibrated monitors if my calibration process changes so much how my monitor looks

-How I can be sure that my calibration is correct and not Dell's



Regards

Alex

--
“The fact is that relatively few photographers ever master their medium. Instead they allow the medium to master them and go on an endless squirrel cage chase from new lens to new paper to new developer to new gadget, never staying with one piece of equipment long enough to learn its full capacities, becoming lost in a maze of technical information that is of little or no use since they don’t know what to do with it”
(written at 1927 by Edward Weston)

Comments

  • CatOneCatOne A man, sans canal or plan Posts: 957Registered Users Major grins
    edited May 31, 2015
    It can't come perfectly calibrated from the factory. Your hardware calibrator is most likely correct. You can always try it again and see if the result match.
  • NewsyNewsy Major grins Posts: 605Registered Users Major grins
    edited June 1, 2015
    What model is it that you have?

    I've seen it myself and read of it from others that until your eyes get used to the changes that the calibration has made, the initial perception is that the color temperature of the screen appears to have shifted closer to 5000K instead of 6500K that was the target of the calibration.

    But I have also read of issues with the Spyder4 where users have had a new sensor sent to them from Datacolor for exactly this issue.

    I also know that there are preferred "modes" to calibrate in with the Dells. In fact, I believe the calibration report you receive with your monitor only applies to one of the several color modes available via the monitor's on screen menu.

    .
Sign In or Register to comment.